A&D TM2440-1-Blood Pressure Monitor Cuffs

Cleaning and Disinfection Recommendations for TM-2657P, TM-2440, TM-2441, UM-211 UA-Series and Cuffs

Cleaning the Main Body and Cuff

To clean the main body and the cuff cover, use a soft cloth soaked with a neutral detergent solution and warm water, then gently wipe down. Then, dry with a soft cloth.

To Disinfect the Main Body

To disinfect the main body, use a soft cloth soaked with an antiseptic solution. The antiseptic solution should be a water solution with the provided dilution ratio of one disinfectant, as shown in the below table. Then, use a different soft cloth, soaked with lukewarm water to gently wipe down the main body. Dry with soft cloth.

Ethanol: Dilution % is 76.9-81.4%
Isopropanol: Dilution % is 70%
Aqueous Solution of the Benzalkonium Chloride: Dilution % is 0.10%
Chlorhexidine Gluconate Solution: Dilution % is 0.5%
Sodium Hypochlorite: Dilution % is 0.05%
A surfactant (detergent for the kitchen) –

To Disinfect the Cuffs

To disinfect the cuff, use a soft cloth soaked with an antiseptic solution. The antiseptic solution should be a water solution with the provided dilution ratio of one disinfectant, as shown in the below table. Then, use a different soft cloth, soaked with lukewarm water to gently wipe down the main body. Dry with soft cloth.

Ethanol: Dilution % is 76.9-81.4%
Isopropanol: Dilution % is 70%
Aqueous Solution of the Chlorhexidine gluconate: Dilution % is 0.5%
Aqueous Solution of the Benzalkonium chloride: Dilution % is 0.1%

Note: If the cuff is damaged, worn or too dirty to clean, please replace the cuff cover.